[email protected]
Top Flight Tools
  • Home
  • Our Products
  • About us
  • Blog
  • Contact us

My cart

0 item(s)
  • Blog
  • DMC99 Swaging Tool Kit & ST825 Tool Guide | NSN, Specifications & ATI AT520 Cross-Reference

Latest products

DLT10PSDI3006 Swage Die
DLT10PSDI3006 Swage Die
DLT20PSDI3008 Swage Die
DLT20PSDI3008 Swage Die
DLT30PSFL4012 End Plate
DLT30PSFL4012 End Plate
$245
D12-9892-08 Inspection Gage
D12-9892-08 Inspection Gage
$1025
D9851-13-06 Deburring Stem
D9851-13-06 Deburring Stem
$325
Banner Image

DMC99 Swaging Tool Kit & ST825 Tool Guide | NSN, Specifications & ATI AT520 Cross-Reference

November 15, 2026

DMC99 Swaging Tool Kit & ST825 Pneumatic Swaging Tool: Specifications, NSN & ATI AT520 Cross-Reference

The DMC99 Swaging Tool Kit and ST825 Pneumatic Swaging Tool, manufactured by Daniels Manufacturing Corporation (DMC), are designed for swaging terminals onto flexible aircraft control cables. These tools support aerospace cable fabrication and maintenance applications requiring accurately formed terminal connections.

Whether you are researching a DMC99 tool kit, replacing an ST825 swaging die, identifying an aircraft cable swaging tool by its National Stock Number (NSN), or cross-referencing DMC and ATI AT520 tooling, this guide provides detailed technical information based on DMC's January 2024 product documentation.

This reference includes tool specifications, cable diameter ranges, military terminal references, cutting and swaging dies, inspection gages, and DMC-to-ATI part-number cross-references.


What Is the DMC99 Swaging Tool Kit?

The DMC99 is a pneumatic aircraft cable swaging tool kit built around the DMC ST825 Swaging Tool. It is designed to swage terminals onto flexible aircraft cables and includes additional tooling for various cable and terminal configurations.

According to DMC's technical literature, the ST825 features a cylinder and yoke assembly, an air hose assembly with a shutoff valve, and a foot control assembly. The tool can be operated by hand or mounted on a cushioned baseplate for bench applications.

The DMC99 kit includes additional components such as a baseplate, gages, cutting dies, swaging dies, and a metal storage case.

DMC99 Tool Kit Identification

SpecificationDetails
ManufacturerDaniels Manufacturing Corporation (DMC)
Tool Kit Part NumberDMC99
Swaging Tool Part NumberST825
National Stock Number5130-00-712-4855
GSA-FSS ReferenceGGG-S-00825A
Cable Diameter Range1/16" to 1/4"
Operating Air Pressure90 PSI (6.2 bar)

DMC ST825 Pneumatic Swaging Tool Specifications

The ST825 is the primary swaging tool supplied with the DMC99 kit. It uses interchangeable dies to accommodate different aircraft cable diameters and terminal configurations.

DMC states that the tool is constructed from heat-treated, hardened steel for durability and portability. Its pneumatic design operates using standard shop air.

ST825 SpecificationValue
Tool Dimensions (with Baseplate)20" × 5" × 3.38"
Tool Weight19 lb (8.61 kg)
Cable Range1/16"–1/4"
Operating Pressure90 PSI
Air Hose Connection3/8" I.D.
Referenced Cable SpecificationsMIL-W-83420 and MIL-W-87161
Optional BaseplateST825001

The ST825 includes a cylinder and yoke assembly, air hose assembly, and foot control assembly with lubricator and air filter. Individual cutting and swaging die sets are sold separately when purchasing the ST825 as a standalone tool.

DMC99 Complete Kit Dimensions and Weight

The complete DMC99 kit measures 25.25" × 12.75" × 7.25" and weighs approximately 155 lb (70.30 kg), according to the manufacturer's literature.


Aircraft Cable Sizes Supported by the DMC99 and ST825

The DMC99 and ST825 tooling system supports aircraft cable diameters ranging from 1/16 inch through 1/4 inch, depending on the selected die and terminal configuration.

Cable DiameterDecimal Equivalent
1/16"0.0625"
3/32"0.09375"
1/8"0.125"
5/32"0.15625"
3/16"0.1875"
7/32"0.21875"
1/4"0.250"

Not every die configuration is offered in every cable size. Always verify the exact die part number and terminal specification before use.


DMC99 and ST825 Swaging Dies — ATI AT520 Cross-Reference

One of the most useful features of DMC's technical documentation is its cross-reference between DMC ST825 dies and ATI AT520 series tooling.

The following tables identify the DMC part number, corresponding terminal reference, cable diameter, and ATI cross-reference provided by the manufacturer.

Double Shank Ball End Terminal Swaging Dies

DMC Part NumberTerminal ReferenceCable DiameterATI Cross-Reference
ST825SDB-2MS20663-21/16"AT520CDB-2
ST825SDB-3MS20663-33/32"AT520CDB-3
ST825SDB-4MS20663-41/8"AT520CDB-4
ST825SDB-5MS20663-55/32"AT520CDB-5
ST825SDB-6MS20663-63/16"AT520CDB-6

Single Shank Ball End Terminal Swaging Dies

These die sets are identified in the DMC literature as left- and right-hand swaging die sets.

DMC Part NumberTerminal ReferenceCable DiameterATI Cross-Reference
ST825SSB-2MS20664-21/16"AT520CSB-2
ST825SSB-3MS20664-33/32"AT520CSB-3
ST825SSB-4MS20664-41/8"AT520CSB-4
ST825SSB-5MS20664-55/32"AT520CSB-5
ST825SSB-6MS20664-63/16"AT520CSB-6

Plain Ball End Terminal Swaging Dies

DMC Part NumberTerminal ReferenceCable DiameterATI Cross-Reference
ST825SB-2BA3-21/16"AT520CB-2
ST825SB-3BA3-33/32"AT520CB-3
ST825SB-4BA3-43/32"AT520CB-4

Reference note: The manufacturer's January 2024 table lists 3/32" for both ST825SB-3 and ST825SB-4. Confirm the correct application against current DMC documentation before selecting a die.


DMC ST825 Sleeve Terminal Swaging Dies — ATI Cross-Reference

The ST825SL series is identified for sleeve-type terminal swaging applications. DMC's technical reference associates this series with the following military terminal specifications: MS20658, MS20667, MS21260, and MS21259.

DMC Part NumberCable DiameterATI Cross-Reference
ST825SL-21/16"AT520CS-2
ST825SL-33/32"AT520CS-3
ST825SL-41/8"AT520CS-4
ST825SL-55/32"AT520CS-5
ST825SL-63/16"AT520CS-6
ST825SL-77/32"AT520CS-7
ST825SL-81/4"AT520CS-8

Important manufacturer note: DMC specifies using the ST825SL-6 die set for the MS20658-7 terminal. This exception should be checked when identifying tooling for that particular terminal.


DMC ST825 Cable Cutting Dies and Punches — ATI AT520 Cross-Reference

The DMC99 kit also includes cable cutting tooling. The manufacturer lists separate cutting die and cutting punch part numbers for each supported cable size.

Cable DiameterDMC Cutting DieATI Cutting DieDMC Cutting PunchATI Cutting Punch
1/16"ST825CD-2-1AT520CD-2ST825CD-2-2AT520CP-2
3/32"ST825CD-3-1AT520CD-3ST825CD-3-2AT520CP-3
1/8"ST825CD-4-1AT520CD-4ST825CD-4-2AT520CP-4
5/32"ST825CD-5-1AT520CD-5ST825CD-5-2AT520CP-5
3/16"ST825CD-6-1AT520CD-6ST825CD-6-2AT520CP-6
7/32"ST825CD-7-1AT520CD-7ST825CD-7-2AT520CP-7
1/4"ST825CD-8-1AT520CD-8ST825CD-8-2AT520CP-8

DMC99 Inspection Gages and Accessories

The DMC99 kit contains additional accessories used with the swaging tooling system. The manufacturer's cross-reference identifies the following components:

DMC Part NumberDescriptionATI Cross-Reference
ST825Pneumatic Swaging ToolNot listed
G689Gage SetAT5205G
ST825003-1SpacerAT520SP-1

Inspection gages are an important component of aircraft cable swaging operations. The applicable maintenance or fabrication instructions should be followed when checking finished swaged terminals.


Are DMC ST825 and ATI AT520 Swaging Dies Interchangeable?

DMC's January 2024 technical sheet includes ATI AT520 part-number cross-references for numerous ST825 swaging and cutting dies.

These cross-references are useful for identifying corresponding tooling when researching replacement components or evaluating an existing aircraft cable swaging kit.

However, a published cross-reference should not be interpreted as automatic authorization to substitute tooling in every aircraft maintenance application.

Before using an alternative die or tool, verify the applicable manufacturer instructions, tooling configuration, terminal specifications, inspection requirements, and any necessary engineering or maintenance authorization.


DMC99 NSN 5130-00-712-4855 — Military and Government Procurement

The DMC99 Swaging Tool Kit is identified in DMC's technical literature with NSN 5130-00-712-4855.

National Stock Numbers are used within military and government supply systems to identify standardized items of supply. They can assist purchasing departments in researching historical procurement records, inventory systems, and equipment requirements.

For procurement purposes, the complete part number, manufacturer identity, equipment configuration, condition, and applicable documentation should be verified before ordering.


DMC99 vs. ST825 — What Is the Difference?

Although the two part numbers are closely related, they identify different purchasing configurations.

FeatureDMC99ST825
Product TypeComplete Swaging Tool KitPneumatic Swaging Tool
Swaging Tool IncludedYesThe tool itself
Dies and GagesIncluded as listed in the kit referenceSold separately
Storage CaseMetal CaseNot specified
Published Weight155 lb19 lb

The DMC99 may be appropriate when a complete tooling configuration is required, while the ST825 may be considered when the user already has the necessary dies and accessories. Verify the actual contents and condition of any new-surplus or used kit before purchase.


Frequently Asked Questions About the DMC99 and ST825

What is the NSN for the DMC99 swaging tool kit?

The National Stock Number listed in DMC's technical documentation is 5130-00-712-4855.

What is the difference between DMC99 and ST825?

The DMC99 is the complete swaging tool kit, while the ST825 is the pneumatic swaging tool used within the kit.

What aircraft cable sizes can the ST825 swage?

The ST825 tooling system covers cable diameters from 1/16 inch to 1/4 inch, depending on the selected die and terminal configuration.

What air pressure does the ST825 require?

DMC specifies an operating air pressure of 90 PSI (6.2 bar).

Are there ATI AT520 equivalents for DMC ST825 dies?

DMC's published technical reference identifies corresponding ATI AT520 series part numbers for numerous ST825 dies, cutting punches, and accessories. Verify compatibility and applicable maintenance requirements before substitution.

What is the DMC equivalent of ATI AT5205G?

The manufacturer's cross-reference identifies DMC G689 as the corresponding gage set.

What is the DMC equivalent of ATI AT520CS-8?

The published cross-reference identifies DMC ST825SL-8, a sleeve-type terminal swaging die for 1/4-inch cable.

Has DMC discontinued the DMC99 swaging tool kit?

The January 2024 manufacturer literature documents the DMC99 and ST825 product family. This historical document does not confirm current manufacturing or discontinuation status. Buyers should verify current availability directly with the manufacturer or an appropriate supplier.


Source Documentation

The technical specifications, NSN, DMC part numbers, terminal references, and ATI cross-references in this article are based on the Daniels Manufacturing Corporation DMC99 & ST825 Swaging Tool Kit & Tool product sheet, document DMC99_&_ST825_SL, dated January 2024.

Published specifications and cross-references may change. Refer to current manufacturer documentation for the latest technical and procurement requirements.


Top Flight Tools — Aerospace Swaging Tooling and Equipment

Top Flight Tools (TFT) is a family-operated aerospace tooling supplier specializing in genuine OEM aircraft tooling, including Permaswage®, Rynglok®, and other specialized aircraft maintenance equipment.

We support aircraft operators, maintenance facilities, MRO organizations, aerospace manufacturers, and procurement departments researching hard-to-find tooling and replacement components.

When requesting a quotation for a DMC99, ST825, ATI AT520 tool, or individual die, please provide the complete part number, quantity, required condition, and any applicable documentation requirements.


⚠️ Disclaimer

Top Flight Tools (TFT) is an independent reseller and is not affiliated with, sponsored by, or endorsed by

Daniels Manufacturing Corporation (DMC), ATI, Snap-on, Permaswage®, Rynglok®, or Precision Castparts Corp. (PCC). All trademarks, registered trademarks, manufacturer names, and part numbers remain the property of their respective owners.

All technical specifications, NSNs, and cross-reference information are provided for informational purposes only. Cross-referenced part numbers do not automatically establish interchangeability, approval, or suitability for any particular aircraft application.

Customers are responsible for verifying current manufacturer specifications, tooling compatibility, maintenance instructions, applicable regulatory requirements, and suitability before purchasing or using any equipment. TFT assumes no liability for errors, omissions, or improper use of the information presented.

Contact us

  • [email protected]
  • Mon to Fri from 9:00 am to 4:00 pm
  • Based in the USA, we proudly ship our high-quality tooling solutions worldwide to meet your needs wherever you are.

Information

  • About Us
  • Warranty And Returns
  • Terms and Conditions
  • Privacy and Cookie Policy

Sections

Follow us by

Sign Up for Newsletter

Top Flight Tools © 2026. All Rights Reserved.

imgpayment