Glenair / BAND-IT® / Tie-Dex II®

The Glenair 600-058 / BAND-IT A40199 Tie-Dex II Hand Banding Tool is designed for standard Tie-Dex clamping bands 600-052 and 600-090. This tool is used for EMI/RFI shield terminations in aerospace, defense, MIL-DTL-38999 connector backshell assemblies, aircraft wiring harnesses, and high-reliability cable assemblies.

The 600-058 operates in a 100 to 180 lb tension range and is typically calibrated at 150 lbs ± 5 lbs for most shield termination applications. This listing is for a new surplus tool, functionally tested before shipment.

The Glenair 600-058 corresponds directly to the BAND-IT® A40199 Tie-Dex II® tool and is specifically designed for use with .240-inch wide standard Tie-Dex® bands. The tool should only be used with genuine Glenair / BAND-IT® bands to ensure proper operation and to prevent premature tool wear or damage.

This aerospace-qualified hand tool features a controlled tensioning mechanism that allows the operator to gradually compress the band using short, even strokes until the handle locks into position, indicating proper band tension has been achieved. The integrated cut-off lever simultaneously locks the buckle and trims excess band material, producing a clean, secure shield termination.

This Glenair 600-058 / BAND-IT A40199 tool is designed for standard Tie-Dex clamping bands, including:

• - Glenair 600-052 standard clamping bands

• - Glenair 600-090 standard clamping bands
  

Technical Docs

The Glenair 600-061 / BAND-IT® A30199 Tie-Dex II® Micro Banding Tool is a precision manual banding tool engineered for the installation of micro-width EMI/RFI shield termination bands used in aerospace, military, avionics, and high-performance electrical harness assemblies. Designed for reliable shield grounding and cable retention applications, the tool provides controlled band tensioning and clean cut-off performance for repeatable high-quality terminations.

The Glenair 600-061 corresponds directly to the BAND-IT® A30199 Tie-Dex II® Micro Banding Tool and is specifically designed for use with .120-inch wide micro Tie-Dex® bands, commonly referred to throughout the aerospace industry as 1/8-inch bands. The tool should only be used with genuine Glenair / BAND-IT® bands to ensure proper operation and prevent premature tool wear or damage.

This aerospace-grade hand tool utilizes a controlled tensioning mechanism that allows the operator to progressively tighten the band using short, even strokes until calibrated tension is achieved. Once tensioned, the integrated cut-off lever simultaneously locks the buckle and trims excess band material, producing a secure and professional shield termination.

The 600-061 / A30199 is widely recognized as a 1/8-inch banding tool for compact EMI shield termination applications and is commonly used in aircraft harness manufacturing, military electronics, M85049 backshell shield terminations, defense systems, motorsports wiring, and other mission-critical cable assembly applications where compact shield termination solutions are required.

Compatible With

The Glenair 600-061 / BAND-IT A30199 Tie-Dex II Micro Banding Tool is designed for use with micro clamping bands, including:

• - Glenair 600-057 micro clamping bands

• - Glenair 600-083 extended-length micro clamping bands

Technical Docs

The Glenair 600-061 / BAND-IT® A30199 Tie-Dex II® Micro Banding Tool is a precision manual banding tool engineered for the installation of micro-width EMI/RFI shield termination bands used in aerospace, military, avionics, and high-performance electrical harness assemblies. Designed for reliable shield grounding and cable retention applications, the tool provides controlled band tensioning and clean cut-off performance for repeatable high-quality terminations.

The Glenair 600-061 corresponds directly to the BAND-IT® A30199 Tie-Dex II® Micro Banding Tool and is specifically designed for use with .120-inch wide micro Tie-Dex® bands, commonly referred to throughout the aerospace industry as 1/8-inch bands. The tool should only be used with genuine Glenair / BAND-IT® bands to ensure proper operation and prevent premature tool wear or damage.

This aerospace-grade hand tool utilizes a controlled tensioning mechanism that allows the operator to progressively tighten the band using short, even strokes until calibrated tension is achieved. Once tensioned, the integrated cut-off lever simultaneously locks the buckle and trims excess band material, producing a secure and professional shield termination.

The 600-061 / A30199 is widely recognized as a 1/8-inch banding tool for compact EMI shield termination applications and is commonly used in aircraft harness manufacturing, military electronics, M85049 backshell shield terminations, defense systems, motorsports wiring, and other mission-critical cable assembly applications where compact shield termination solutions are required.

Compatible With

The Glenair 600-061 / BAND-IT A30199 Tie-Dex II Micro Banding Tool is designed for use with micro clamping bands, including:

• - Glenair 600-057 micro clamping bands

• - Glenair 600-083 extended-length micro clamping bands

Technical Docs

The Glenair 600-058 / BAND-IT A40199 Tie-Dex II Hand Banding Tool is designed for standard Tie-Dex clamping bands 600-052 and 600-090. This tool is used for EMI/RFI shield terminations in aerospace, defense, MIL-DTL-38999 connector backshell assemblies, aircraft wiring harnesses, and high-reliability cable assemblies.

The 600-058 operates in a 100 to 180 lb tension range and is typically calibrated at 150 lbs ± 5 lbs for most shield termination applications. This listing is for a used tool, functionally tested before shipment.

The Glenair 600-058 corresponds directly to the BAND-IT® A40199 Tie-Dex II® tool and is specifically designed for use with .240-inch wide standard Tie-Dex® bands. The tool should only be used with genuine Glenair / BAND-IT® bands to ensure proper operation and to prevent premature tool wear or damage.

This aerospace-qualified hand tool features a controlled tensioning mechanism that allows the operator to gradually compress the band using short, even strokes until the handle locks into position, indicating proper band tension has been achieved. The integrated cut-off lever simultaneously locks the buckle and trims excess band material, producing a clean, secure shield termination.

Compatible With

This Glenair 600-058 / BAND-IT A40199 tool is designed for standard Tie-Dex clamping bands, including:

• - Glenair 600-052 standard clamping bands

• - Glenair 600-090 standard clamping bands

Technical Docs