Snap-on/ATI Tools Cable Swagers

Browse our Snap-on/ATI Tools Cable Swagers for aerospace maintenance, repair and manufacturing. Genuine tooling with fast US shipping and expert RFQ support from Top Flight Tools.

Snap-on/ATI Tools Cable Swagers - Top Flight Tools
ATI520JK Cable Swaging Kit

ATI520JK
Cable Swaging Kit

N.S.N. 5130-00-712-4855

Availability: 1

The ATI520JK AT520JK Cable Terminal Swaging Kit is a complete, pneumatically powered system engineered for precision swaging of MS sleeve-type and ball-end cable terminals in aerospace, defense, marine, and industrial environments. It accommodates cable sizes from 1/16" (0.0625 in) up to 1/4" (0.25 in), with included dies covering double-shank, single-shank, plain ball-end, and sleeve-type terminals.

Swaging is performed using matched die sets inserted into the swager’s yoke cavity. The operator applies regulated air pressure (minimum 90 psi, via a ≥3/8" I.D. airline) while rotating the cable or terminal during swaging to ensure uniform metal deformation and optimal terminal seating.

Condition Note:

This tool is sold in Used / Serviceable condition but is exceptionally clean and has seen very limited use. Based on its known history, the tool has only been used a few times. Most of the visible cosmetic wear is the result of handling, transportation, and being moved between different facilities, rather than extensive operation. Minor scratches, scuffs, or handling marks may be present; however, these cosmetic imperfections are not indicative of heavy use and do not affect the tool’s fit, form, function, or performance.


Included Components

  • ATI520J Pneumatic Cable Terminal Swager (hand-held or bench-mount capable)

  • ATI520SG “GO” Swage Gauge for quality verification

  • Felco C7 Cable Cutters

  • ATISP1001 Turnbuckle Wrench

  • ATI520SP Spacer

  • ATI520CKB Carrying Case

  • Air hose and foot control assembly for pneumatic operation

  • Complete matched die set for all supported terminal types


Swaging Dies Supported:

  • Double-shank ball-end terminals: ATI520CDB-2 through ATI520CDB-6 (1/16" to 3/16" cables)

  • Single-shank ball-end terminals: ATI520CSB-2 through ATI520CSB-6 (1/16" to 3/16")

  • Plain ball-end terminals: ATI520CB-2 to ATI520CB-4 (1/16" to 1/8")

  • MS sleeve-type terminals: ATI520CS-2 through ATI520CS-8 (1/16" to 1/4")

  • Cable cut-off & trim dies: ATI520CD-2 through ATI520CD-8, with matching punches ATI520CP-2 through ATI520CP-8


Operational Highlights:

  • Pneumatic drive ensures consistent swaging force and repeatable results

  • Rotational swaging technique (180° arcs or full revolutions) yields uniform, specification-compliant swage profiles while reducing die wear

  • Integrated safety guard (must be in place during operation)

  • Built-in tool oiler: refill every eight hours with air-tool lubricant for optimal service life


Applications:
Ideal for aerospace, aviation maintenance, marine rigging, defense systems, and industrial cable fabrication, where precision terminal installation is critical.

Condition and Warranty for Used Tools:
This tool is sold as a used item and has been verified to be in good working condition as per the manufacturer's specifications. While it may show signs of wear consistent with previous use, its functionality and performance meet operational standards. All used tools include a 90-day warranty covering defects in materials and workmanship under normal use. Please note that the warranty does not cover cosmetic wear, misuse, or improper tool operation.

ATI520J Cable Swager

ATI520J
Cable Swager

N.S.N. 5130-01-212-9426

Out of Stock

The ATI520J Portable Cable Terminal Swager is a lightweight, pneumatically powered tool engineered for precision swaging of MS sleeve‑type and ball‑end cable terminals in aerospace, defense, and industrial environments. It accommodates cable sizes from 1/16" (0.0625 in) up to 3/16" (0.1875 in)

Swaging is performed using matched die sets inserted into the yoke cavity. The operator applies regulated air pressure (minimum 90 psi, via a ≥3/8" I.D. airline) while rotating the cable or terminal during swaging to ensure uniform metal deformation and optimal terminal seating.

Included Components:

  • Base plate for stable bench mounting (optional hand‑held operation also supported)

  • Air hose and foot control for pneumatic operation

Swaging Dies Supported:

  • Double‑shank ball‑end terminals: ATI520CDB‑2 through ATI520CDB‑6 for 1/16" to 3/16" cables

  • Single‑shank ball‑end terminals: ATI520CSB‑2 through ATI520CSB‑6

  • Plain ball‑end terminals: ATI520CB‑2 to ATI520CB‑4

  • MS sleeve‑type terminals: ATI520CS‑2 through ATI520CS‑8 covering 1/16" to 1/4" cable sizes

  • Cable cut‑off and trim dies: ATI520CD‑2 through ATI520CD‑8, with corresponding punches ATI520CP‑2 through ATI520CP‑8 Operational Highlights:

  • Pneumatic drive ensures consistent force for swaging cycles.

  • Rotational swaging technique (180° arcs or full revolutions) yields quality swage profiles while minimizing tooling wear. Oiler for maintenance: Built‑in tool oiler should be refilled every eight hours with air‑tool lubricant

Applications:
Ideal for aerospace, aviation maintenance, defense, and industrial settings where precision cable-terminal swaging is critical.

Condition & Warranty Used Tools:
This swager is offered as a used, fully serviced unit, verified for operational performance to manufacturer specifications. Cosmetic wear may be present, but all functional parts meet strict quality standards. A 90-day warranty covers defects in materials and workmanship under normal use; damage from misuse, improper operation, or cosmetic wear is excluded.